Home ProductsElectromagnetic Flow Meter

Insertion Type Electromagnetic Flow Meter High Performance for Food Industry

Insertion Type Electromagnetic Flow Meter High Performance for Food Industry

Insertion Type Electromagnetic Flow Meter High Performance for Food Industry

Product Details:

Place of Origin: China
Brand Name: Metlan
Certification: CE/CMC/ISO9001
Model Number: MTF

Payment & Shipping Terms:

Minimum Order Quantity: 1pc
Price: negotiation
Packaging Details: in wooden box
Delivery Time: 7 working days after received your payment
Payment Terms: T/T or western Union
Supply Ability: 100pcs per month
Contact Now
Detailed Product Description
Product Name: Insertion Type Water Electromagnetic Meter Application: Environmental Protection、Chemical Industry Etc.
Pressure: 4.0,1.6,2.5MPa Accuracy: ±0.2% Or ±0.5%
Protection Level: IP68 Output Signal: 4-20mA,pulse,RS485

Insertion Type Electromagnetic Flow Meter High Performance
 

 
Introduction:


    MTF electromagnetic flow meter, composed of sensor and converter, works based 

on Faraday’s law of electromagnetic induction. It is used to measure electrical

conductivity of liquid or solid. Generally, the electrical conductivity should be over 

5υS/cm(electrical conductivity of tap water, raw water is about 100~500υS/cm),It can 

also be used to measure various mediums like acid, alkali, saline solution,paper,pulp,
ore pulp and so on.But these mediums can’t contain a lot of magnetic materials and bubbles.
MTF electromagnetic flow meter is, a kind of instrument,used for measuring the flow 

conductivity liquid, which is widely used in flow measuring of Metallurgy,Chemical industry 

Paper industry, Environmental protection, Oil industry, Textile industry,Food industry

 

 

 

 

Installation location precautions


The installation location is chosen according to the following requirements, ensuring

the stable and continuous operation of instruments.
Atmosphere temperature: avoid large temperature change and sunshine, if some thermal

radiation in the installation location, the thermal insulation and ventilation should be applied.
Air condition: avoid strongly corrosion and explosive gas in the installation location
(non-explode-resistant instrument).

 


Change adapter direction


It is not recommended to change the adapter direction by users, if it is necessary to

change, pleasecontact service center.

 


Product application scope


The insert-type electromagnetic flow-meter is composed of sensors and adapter, using

for measuring conductive liquid. During measurement, conductivity is required to be

more than 5μ s/cm, and water, sewage, acid and alkali and so on could be measured.

 

 

 

Sensor structure


The sensor is composed of measurement detector, installation flange and wire box

(separate type)
Adapter
Flange
Base
and so on. The sensor outline is in cylinder shape with installation flange, inside which

the excitation winding used for exciting, magnet-conductive winding and two electrodes

of magnet-conductive core, contacting liquid, are installed.
 

 

 

 

Linging material

 

Lining material Main Performance Applied Scope
PTFE
  1. Have the most stable chemical properties in plastics, and resist boiling hydrochlor and sulfuric acid, nitric acid aqua regia, strong alkali, and all kinds of organic solvents, but can not resist the corrosion of chlorine trifluoride, liquid fluorine, liquid oxygen and ozone.
  2. Low abrasion resistance

3.Low negative pressure resistance

1. -25℃-140℃

2. Strong corrosion medium, like strong acid and alkali.

3.Healthcare medium

CR Oil proof, solvent resistance, oxidatite resistance and the resist the erosion of common medium like acid, alkali, salt, etc

1.<80℃

2.be able to measure sewage and mud

PU
  1. Very good abrasive resistance, flexibility

2. Low acid and alkali resistance

1. <65℃

2. Neutral strong abrasion resistance medium

Hard Rubber
  1. Good resistance to room temperature, hydrochloric acid, acetic acid, oxalic acid, ammonia, phosphoric acid and 50% sulfuric acid, sodium hydroxide, potassium hydroxide
  2. Avoid strong oxidants

1.<80℃

2.General acid, alkali, salt solution

PFA
  1. can be used for most corrosive medium like acids, alkalis, and strong oxidant.
  2. 2.high material strength, resistance to aging, better than PTFE,EFP in high temperature
  3. Injection molding for higher negative pressure

1.40-180℃

  1. strong corrosion medium, like strong acid and alkali
  2. Healthcare medium
FEP(F46)
  1. hydrophobicity and non-viscous
  2. Corrosion resistance is inferior to PFA
  3. Negative pressure

1.40-180℃

  1. strong corrosion medium, like strong acid and alkali
  2. Healthcare medium

 

Contact Details
Nanjing Metlan Measurement & Control Instrument Co., Ltd

Contact Person: Mandy Zhang

Tel: +8613451802300

Send your inquiry directly to us (0 / 3000)